AmneziaWG Setup Guide
AmneziaWG is a version of WireGuard that disguises VPN traffic so it is not recognised and blocked. It uses the same encryption and gives the same speed as WireGuard. We use it for locations and networks where standard WireGuard is blocked.
Use the AmneziaWG app. An AmneziaWG profile cannot be imported into the regular WireGuard app, and a regular WireGuard profile will not use AmneziaWG's protection. Install the AmneziaWG app below and import the file we sent you.
What you need
- The
.conf file and QR code from your MoreVPN order email
- The free AmneziaWG app for your device (links below)
No account, username or password is needed. Your profile is already set up for your dedicated IP.
1. iPhone / iPad
Step 2 Open the app and tap + (Add a tunnel).
Step 3 Choose Create from QR code and scan the QR code from your order email, or choose Create from file or archive and select the .conf file.
Step 4 Allow the app to add VPN configurations when iOS asks, then turn the tunnel switch on.
2. Android
Step 2 Open the app and tap the + button.
Step 3 Choose Scan from QR code, or Import from file or archive and select the .conf file.
Step 4 Turn the tunnel switch on and allow the VPN connection request.
3. Windows
Step 2 Save the .conf file from your order email to your computer.
Step 3 Open AmneziaWG, click Import tunnel(s) from file, and select the .conf file.
Step 4 Click Activate. The status changes to Active when you are connected.
Windows 10 or 11 is recommended. Windows may show a security prompt the first time; this is normal for a VPN installer.
4. macOS
Step 2 Save the .conf file from your order email.
Step 3 Open AmneziaWG from the menu bar or Applications and choose Import tunnel(s) from file, then select the .conf file.
Step 4 Click Allow when macOS asks to add the VPN configuration, then click Activate.
Check that it works
With the tunnel on, open api.ipify.org. It should show your dedicated IP from the order email.
Troubleshooting
- Connected but no internet: turn the tunnel off and on again. If it still does not load, restart the app.
- "Invalid configuration" when importing: make sure you are using the AmneziaWG app, not the regular WireGuard app.
- Several devices: each device needs its own profile. If two devices use the same profile at the same time, they will keep disconnecting each other. See multiple devices.
Need help? Open a private ticket at
morevpn.com/support with your Order ID. Tickets are usually answered faster than email.
← Back to Knowledge Base
Can't find what you need?